New Fence Installation in Rancho Cucamonga, CA
A new fence is a big job. The company should measure, check your property line, pull the permit if one is needed, and set posts deep enough to stay straight.
- Solid wood with steel frame. The city approves it for privacy fences, and steel framing gives it a longer life in the heat.
- Solid vinyl privacy fence. Vinyl is on the approved list for privacy and does not need re-staining.
- Tubular steel or wrought iron. Open fencing can go to 6 feet even in front yards, where a solid fence is limited to 3 feet.
- Decorative block wall. The city requires decorative block for walls around new developments, and it needs a permit above 3 feet.
- Retaining walls. Foothill lots often have grade changes. Walls are capped at 4 feet with 3 feet between steps.
Strong sun and dry heat fade and dry out wood and vinyl. Sealing and quality finishes help.
The city sits just south of the San Gabriel foothills. Hillside lots often need retaining walls, and the city limits retaining walls to 4 feet with 3 feet between stepped walls.
Graffiti-resistant surfaces are required on fences and walls next to a public right of way and in residential zones.
Typical prices in Rancho Cucamonga
| Job | Typical range | Basis |
|---|---|---|
| Wood fence, per linear foot installed | $20-$50 | national 2025 |
| Vinyl fence, per linear foot installed | $30-$60 | national 2025 |
| Wrought iron fence, per linear foot installed | $50-$85 or more | national 2025 |
| Chain link fence, per linear foot installed | $9-$30 | national 2025 |
Ranges, not quotes. Your price depends on the job.
Rancho Cucamonga rules that apply
New fences and walls go through site development review unless an exemption applies. Residential fences that follow the city's height and material rules are exempt. A building permit is required for a fence taller than 6 feet, for any concrete or masonry wall or pilasters taller than 3 feet, and for retaining walls 3 feet or taller.
- In the front yard, solid fences and walls cannot be taller than 3 feet. Open fencing like wrought iron or picket can go to 6 feet. Solid and open can be combined up to 6 feet.
- In side and rear yards, fences and walls up to 6 feet are allowed.
- On the street side of a corner lot, new fences and walls up to 6 feet must be set back at least 5 feet from the property line.
- At street corners, keep a clear visibility triangle with sides 20 feet long along each curb. At driveway or alley corners, the triangle has 10 foot sides. Nothing in it can be over 3 feet.
- Chain link is not allowed for screening or privacy in any zone, even with slats, plastic sheeting or privacy mesh.
- Privacy fences and gates must be solid wood with steel frames, solid vinyl, tubular steel or wrought iron. Tubular steel and wrought iron must be backed by painted metal sheeting.
- Walls around the edge of a new residential development must be decorative block, such as split-face or fluted block, or block with stucco or stackstone.
- The height limit can be raised by up to 2 feet through a Minor Exception from Planning. Neighbors are notified and there is a 10-day comment period.
Questions
How tall can my front yard fence be in Rancho Cucamonga?
A solid fence or wall is limited to 3 feet. Open fencing like wrought iron or picket can go to 6 feet. You can combine solid and open up to 6 feet total.
Can I use chain link?
Not for screening or privacy in any zone. That includes chain link with slats, plastic sheeting or privacy mesh.
What can I build a privacy fence from?
Solid wood with steel frames, solid vinyl, tubular steel or wrought iron. Tubular steel and wrought iron must be backed by painted metal sheeting.
How tall can a retaining wall be?
Up to 4 feet, with at least 3 feet between stepped walls. A building permit is required for retaining walls 3 feet or taller.